Texas Instruments
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
INA208AIDGSTG4
Ver Detalle Hojas de datos

INA208AIDGSTG4

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Amplifier
  • Characteristics: High precision, low power consumption
  • Package: DGS (8-pin VSSOP)
  • Essence: Instrumentation amplifier
  • Packaging/Quantity: Tape and reel (2500 units per reel)

Specifications

  • Supply Voltage: 2.7V to 5.5V
  • Input Offset Voltage: ±150µV (maximum)
  • Gain Bandwidth Product: 1MHz (typical)
  • Input Bias Current: ±50nA (maximum)
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The INA208AIDGSTG4 has the following pin configuration:

  1. REF: Reference voltage input
  2. IN+: Non-inverting input
  3. IN-: Inverting input
  4. VS-: Negative supply voltage
  5. OUT: Output
  6. VS+: Positive supply voltage
  7. RG: Gain setting resistor
  8. NC: No connection

Functional Features

  • High common-mode rejection ratio (CMRR)
  • Low input offset voltage
  • Rail-to-rail output swing
  • Wide supply voltage range
  • Low quiescent current

Advantages and Disadvantages

Advantages: - High precision amplification - Wide operating temperature range - Low power consumption

Disadvantages: - Limited gain bandwidth product - Only available in a specific package type

Working Principles

The INA208AIDGSTG4 is an instrumentation amplifier designed for accurate signal amplification. It utilizes a differential input stage to amplify small differential signals while rejecting common-mode noise. The gain of the amplifier can be set by an external resistor connected to the RG pin.

Detailed Application Field Plans

The INA208AIDGSTG4 is commonly used in various applications, including:

  1. Medical devices: ECG amplification
  2. Industrial automation: Sensor signal conditioning
  3. Test and measurement equipment: Precision signal amplification
  4. Automotive electronics: Battery monitoring systems

Detailed and Complete Alternative Models

  1. INA206AIDGSTG4: Similar specifications, different package (DGS)
  2. INA209AIDGSTG4: Higher gain bandwidth product, same package (DGS)
  3. INA207AIDGSTG4: Lower input offset voltage, same package (DGS)

These alternative models provide similar functionality to the INA208AIDGSTG4 but may have slight differences in performance or features.

Word count: 275 words

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de INA208AIDGSTG4 en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of INA208AIDGSTG4 in technical solutions:

  1. Question: What is the INA208AIDGSTG4?
    Answer: The INA208AIDGSTG4 is a high-precision, low-power, bidirectional current-sensing amplifier.

  2. Question: What is the purpose of using the INA208AIDGSTG4?
    Answer: The INA208AIDGSTG4 is used to accurately measure and monitor bidirectional current flow in various applications.

  3. Question: What is the voltage supply range for the INA208AIDGSTG4?
    Answer: The INA208AIDGSTG4 operates with a voltage supply range from 2.7V to 5.5V.

  4. Question: What is the maximum common-mode voltage range supported by the INA208AIDGSTG4?
    Answer: The INA208AIDGSTG4 supports a maximum common-mode voltage range of -0.2V to +26V.

  5. Question: Can the INA208AIDGSTG4 be used for both AC and DC current measurements?
    Answer: Yes, the INA208AIDGSTG4 can be used for both AC and DC current measurements.

  6. Question: What is the typical gain accuracy of the INA208AIDGSTG4?
    Answer: The typical gain accuracy of the INA208AIDGSTG4 is ±0.5%.

  7. Question: Does the INA208AIDGSTG4 provide any fault detection features?
    Answer: Yes, the INA208AIDGSTG4 includes overcurrent and undervoltage lockout (UVLO) protection features.

  8. Question: What is the bandwidth of the INA208AIDGSTG4?
    Answer: The bandwidth of the INA208AIDGSTG4 is typically 200kHz.

  9. Question: Can the INA208AIDGSTG4 be used in high-temperature environments?
    Answer: Yes, the INA208AIDGSTG4 is designed to operate in a temperature range of -40°C to +125°C.

  10. Question: What are some common applications for the INA208AIDGSTG4?
    Answer: The INA208AIDGSTG4 is commonly used in power management systems, motor control, battery monitoring, and industrial automation applications.

Please note that these answers are general and may vary depending on specific use cases and requirements.