Texas Instruments
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
INA303A2IPW
Ver Detalle Hojas de datos

INA303A2IPW

Product Overview

Category

The INA303A2IPW belongs to the category of integrated circuit (IC) amplifiers.

Use

It is primarily used for precision current sensing in various applications.

Characteristics

  • High accuracy and precision
  • Low offset voltage and drift
  • Wide input voltage range
  • Low quiescent current
  • Rail-to-rail output swing capability

Package

The INA303A2IPW comes in a small outline package (SOP) with 8 pins.

Essence

The essence of the INA303A2IPW lies in its ability to accurately measure current in a wide range of applications.

Packaging/Quantity

The INA303A2IPW is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Supply Voltage: 2.7V to 5.5V
  • Input Common Mode Voltage Range: -0.1V to Vcc + 0.1V
  • Quiescent Current: 60µA (typical)
  • Gain Bandwidth Product: 500kHz (typical)
  • Offset Voltage: 100µV (maximum)
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The INA303A2IPW has the following pin configuration:

  1. V+ (Positive Power Supply)
  2. V- (Negative Power Supply)
  3. IN- (Inverting Input)
  4. IN+ (Non-Inverting Input)
  5. OUT (Output)
  6. REF (Reference Voltage)
  7. SET (Gain Setting)
  8. NC (No Connection)

Functional Features

  • High-precision current sensing
  • Adjustable gain setting
  • Overload detection and protection
  • Low power consumption
  • Wide temperature range operation

Advantages and Disadvantages

Advantages

  • High accuracy and precision in current sensing
  • Wide input voltage range allows for versatile applications
  • Low quiescent current minimizes power consumption
  • Rail-to-rail output swing capability ensures maximum signal integrity

Disadvantages

  • Limited gain bandwidth product may restrict high-frequency applications
  • Higher cost compared to some alternative models

Working Principles

The INA303A2IPW operates based on the principle of measuring the voltage drop across a shunt resistor to determine the current flowing through it. It utilizes a differential amplifier configuration to amplify and accurately measure the small voltage difference.

Detailed Application Field Plans

The INA303A2IPW finds extensive use in various applications, including but not limited to:

  1. Battery management systems
  2. Power supply monitoring
  3. Motor control
  4. Current monitoring in industrial equipment
  5. Solar power systems
  6. Automotive electronics

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to the INA303A2IPW are:

  1. INA301A1IPW
  2. INA302B1IPW
  3. INA304C1IPW
  4. INA305D1IPW
  5. INA306E1IPW

These models offer similar functionality and characteristics, providing options for different design requirements.

Word count: 380 words

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de INA303A2IPW en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of INA303A2IPW in technical solutions:

  1. Q: What is the INA303A2IPW? A: The INA303A2IPW is a high-side current sense amplifier with voltage output, commonly used for precision current measurement in various technical applications.

  2. Q: What is the operating voltage range of the INA303A2IPW? A: The INA303A2IPW operates within a voltage range of 2.7V to 5.5V.

  3. Q: What is the maximum input common-mode voltage of the INA303A2IPW? A: The INA303A2IPW can handle a maximum input common-mode voltage of 36V.

  4. Q: How accurate is the current measurement provided by the INA303A2IPW? A: The INA303A2IPW offers high accuracy with a typical gain error of ±0.5% and offset error of ±50µV.

  5. Q: Can the INA303A2IPW measure bidirectional currents? A: No, the INA303A2IPW is a unidirectional current sense amplifier and can only measure currents flowing in one direction.

  6. Q: What is the bandwidth of the INA303A2IPW? A: The INA303A2IPW has a bandwidth of 100 kHz, making it suitable for applications requiring fast response times.

  7. Q: Does the INA303A2IPW have any built-in protection features? A: Yes, the INA303A2IPW includes built-in overcurrent detection and thermal shutdown protection to safeguard against faults and excessive temperatures.

  8. Q: Can the INA303A2IPW be used in high-temperature environments? A: Yes, the INA303A2IPW has an extended temperature range of -40°C to 125°C, allowing it to operate reliably in harsh conditions.

  9. Q: What is the package type of the INA303A2IPW? A: The INA303A2IPW comes in a small SOT-23 package, which is suitable for space-constrained applications.

  10. Q: What are some typical applications of the INA303A2IPW? A: The INA303A2IPW is commonly used in battery management systems, power supplies, motor control, and other applications where accurate current measurement is required.

Please note that these answers are general and may vary depending on the specific requirements and use cases of your technical solution.