La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
LM2901AVQDRG4

LM2901AVQDRG4

Overview

Category: Integrated Circuit (IC)

Use: Comparator

Characteristics: - Low power consumption - Wide supply voltage range - High input impedance - Rail-to-rail output swing - Low input offset voltage - Low input bias current

Package: VQFN-14

Essence: The LM2901AVQDRG4 is a quad, low-power, general-purpose comparator. It operates from a single power supply and is designed to operate over a wide range of voltages. This makes it suitable for battery-powered applications.

Packaging/Quantity: The LM2901AVQDRG4 is available in a VQFN-14 package. It is typically sold in reels of 2500 units.

Specifications

  • Supply Voltage Range: 2V to 36V
  • Input Offset Voltage: ±2mV
  • Input Bias Current: ±25nA
  • Response Time: 1.3μs
  • Output Current: 20mA
  • Operating Temperature Range: -40°C to +125°C

Pin Configuration

The LM2901AVQDRG4 has a total of 14 pins arranged as follows:

___________ NC |1 14| VCC IN- |2 13| OUT1 IN+ |3 12| OUT2 GND |4 11| OUT3 IN- |5 10| OUT4 IN+ |6 9| NC GND |7 8| NC -----------

Functional Features

  • Quad independent comparators
  • Open collector outputs
  • Internal hysteresis
  • Low input offset voltage drift
  • Low output saturation voltage

Advantages and Disadvantages

Advantages: - Low power consumption - Wide supply voltage range - High input impedance - Rail-to-rail output swing - Low input offset voltage - Low input bias current

Disadvantages: - Limited output current capability - No internal pull-up resistors

Working Principles

The LM2901AVQDRG4 is a comparator that compares the voltages at its two inputs (IN+ and IN-) and produces a digital output based on the comparison result. When the voltage at IN+ is higher than the voltage at IN-, the output goes low, and when the voltage at IN+ is lower than the voltage at IN-, the output goes high.

Detailed Application Field Plans

The LM2901AVQDRG4 can be used in various applications including: - Battery-powered devices - Voltage level detection - Signal conditioning - Motor control - Power management systems - Industrial automation

Detailed and Complete Alternative Models

Some alternative models to the LM2901AVQDRG4 include: - LM339 - LM393 - LM311 - LM324 - LM358

These models offer similar functionality and can be used as replacements depending on the specific requirements of the application.

In conclusion, the LM2901AVQDRG4 is a versatile quad comparator IC with low power consumption, wide supply voltage range, and high input impedance. It is commonly used in battery-powered devices, voltage level detection, and signal conditioning applications. While it has limitations in terms of output current capability and lack of internal pull-up resistors, there are alternative models available to suit different application needs.

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de LM2901AVQDRG4 en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of LM2901AVQDRG4:

1. What is LM2901AVQDRG4? LM2901AVQDRG4 is a quad differential comparator that can be used in various technical solutions.

2. What is the operating voltage range of LM2901AVQDRG4? The operating voltage range of LM2901AVQDRG4 is typically between 2V and 36V.

3. What is the input offset voltage of LM2901AVQDRG4? The input offset voltage of LM2901AVQDRG4 is typically around 2mV.

4. Can LM2901AVQDRG4 be used as a voltage level detector? Yes, LM2901AVQDRG4 can be used as a voltage level detector by comparing an input voltage with a reference voltage.

5. What is the maximum output current of LM2901AVQDRG4? The maximum output current of LM2901AVQDRG4 is typically around 20mA.

6. Can LM2901AVQDRG4 be used in automotive applications? Yes, LM2901AVQDRG4 is qualified for automotive applications and meets the AEC-Q100 standard.

7. Is LM2901AVQDRG4 suitable for battery-powered applications? Yes, LM2901AVQDRG4 has a low supply current and can be used in battery-powered applications.

8. Can LM2901AVQDRG4 operate in a wide temperature range? Yes, LM2901AVQDRG4 can operate in a wide temperature range, typically from -40°C to 125°C.

9. Can LM2901AVQDRG4 be used in industrial control systems? Yes, LM2901AVQDRG4 is suitable for use in industrial control systems due to its robustness and reliability.

10. What are the typical applications of LM2901AVQDRG4? Some typical applications of LM2901AVQDRG4 include voltage level detection, window comparators, motor control, and power supply monitoring.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.