Texas Instruments
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
PCA9538PWG4
Ver Detalle Hojas de datos

PCA9538PWG4

Introduction

The PCA9538PWG4 is a versatile and widely used 8-bit I2C-bus and SMBus I/O expander. This device provides general-purpose remote I/O expansion for most microcontroller families via the I2C-bus interface. It is designed to operate at 2.3 V to 5.5 V, making it suitable for various applications.

Basic Information Overview

  • Category: I/O Expander
  • Use: Remote I/O Expansion
  • Characteristics: Versatile, I2C/SMBus Interface, Wide Voltage Range
  • Package: TSSOP
  • Essence: General-Purpose I/O Expansion
  • Packaging/Quantity: Reel (2500)

Specifications

  • Voltage Range: 2.3 V to 5.5 V
  • Number of I/Os: 8
  • Interface: I2C-bus/SMBus
  • Package Type: TSSOP
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The PCA9538PWG4 features a TSSOP package with 16 pins. The pin configuration is as follows: 1. P0 - I/O Port 0 2. P1 - I/O Port 1 3. P2 - I/O Port 2 4. P3 - I/O Port 3 5. P4 - I/O Port 4 6. P5 - I/O Port 5 7. P6 - I/O Port 6 8. P7 - I/O Port 7 9. A0 - Address Input 10. A1 - Address Input 11. SDA - I2C-bus Serial Data Line 12. SCL - I2C-bus Serial Clock Line 13. INT - Interrupt Output 14. GND - Ground 15. NC - No Connect 16. VCC - Supply Voltage

Functional Features

  • I2C-bus/SMBus Interface: Allows easy interfacing with microcontrollers
  • Programmable Output Polarity Inversion: Provides flexibility in output control
  • Low Standby Current: Enables power-efficient operation
  • Interrupt Output: Notifies the microcontroller of input changes

Advantages and Disadvantages

Advantages: - Versatile I/O expansion - Wide voltage range compatibility - Programmable output polarity inversion

Disadvantages: - Limited number of I/O ports - Requires external pull-up resistors for I2C-bus interface

Working Principles

The PCA9538PWG4 operates by receiving commands from the microcontroller through the I2C-bus or SMBus interface. It then processes these commands to control the input/output ports and provide status information through the interrupt output.

Detailed Application Field Plans

The PCA9538PWG4 finds application in various fields such as: - Industrial Automation - Consumer Electronics - Automotive Systems - IoT Devices - Robotics

Detailed and Complete Alternative Models

Some alternative models to the PCA9538PWG4 include: - MCP23008 - MAX7311 - PCF8574

In conclusion, the PCA9538PWG4 is a highly versatile I/O expander with wide compatibility and programmable features, making it suitable for diverse applications.

Word Count: 411

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de PCA9538PWG4 en soluciones técnicas

  1. What is PCA9538PWG4?

    • PCA9538PWG4 is an 8-bit I2C-bus and SMBus I/O expander designed for 2.3-V to 5.5-V VCC operation.

  2. What are the key features of PCA9538PWG4?

    • The key features include 5V tolerant I/Os, open-drain outputs, and a hardware address pin for using up to 4 devices on the same bus.

  3. How can PCA9538PWG4 be used in technical solutions?

    • PCA9538PWG4 can be used to expand the I/O capabilities of microcontrollers, interface with various sensors and actuators, and control LEDs and other digital signals.

  4. What is the maximum frequency supported by PCA9538PWG4?

    • The maximum frequency supported by PCA9538PWG4 is 400 kHz.

  5. Can PCA9538PWG4 be used with both 3.3V and 5V microcontrollers?

    • Yes, PCA9538PWG4 is compatible with both 3.3V and 5V microcontrollers due to its 5V tolerant I/Os.

  6. How many PCA9538PWG4 devices can be connected on the same bus?

    • Up to 4 PCA9538PWG4 devices can be connected on the same bus by using the hardware address pin to set unique addresses for each device.

  7. What are the typical applications of PCA9538PWG4?

    • Typical applications include LED dimming and blinking, push button inputs, and driving indicators and relays.

  8. Does PCA9538PWG4 have built-in ESD protection?

    • Yes, PCA9538PWG4 has built-in ESD protection exceeding 4 kV HBM per JESD22-A114, 200 V MM per JESD22-A115, and 1000 V CDM per JESD22-C101.

  9. What is the operating temperature range of PCA9538PWG4?

    • The operating temperature range of PCA9538PWG4 is from -40°C to 125°C.

  10. Is there any evaluation board available for PCA9538PWG4?

    • Yes, an evaluation board, such as the PCA9538PWG4EVM, is available to facilitate testing and development with PCA9538PWG4.