Consulte las especificaciones para obtener detalles del producto.
SN74HC573ADW
Product Overview
- Category: Integrated Circuit
- Use: Octal Transparent D-Type Latches with 3-State Outputs
- Characteristics:
- High-Speed CMOS Logic
- 3-State Outputs for Bus-Oriented Applications
- Output Drive Capability: 15 LSTTL Loads
- Low Power Consumption
- Balanced Propagation Delays
- Package: SOIC (Small Outline Integrated Circuit)
- Essence: The SN74HC573ADW is an octal transparent latch that features 3-state outputs, making it suitable for bus-oriented applications.
- Packaging/Quantity: Tape and Reel, 2500 pieces per reel
Specifications
- Supply Voltage Range: 2V to 6V
- Input Voltage Range: 0V to VCC
- Operating Temperature Range: -40°C to +85°C
- Output Current: ±6mA
- Propagation Delay Time: 13ns (typical)
- Output Capacitance: 10pF (typical)
Detailed Pin Configuration
The SN74HC573ADW has a total of 20 pins. The pin configuration is as follows:
- GND (Ground)
- D0 (Data Input 0)
- D1 (Data Input 1)
- D2 (Data Input 2)
- D3 (Data Input 3)
- D4 (Data Input 4)
- D5 (Data Input 5)
- D6 (Data Input 6)
- D7 (Data Input 7)
- OE (Output Enable)
- LE (Latch Enable)
- Q0 (Output 0)
- Q1 (Output 1)
- Q2 (Output 2)
- Q3 (Output 3)
- Q4 (Output 4)
- Q5 (Output 5)
- Q6 (Output 6)
- Q7 (Output 7)
- VCC (Supply Voltage)
Functional Features
- Octal transparent latch with 3-state outputs
- Output enable and latch enable control signals
- High-speed CMOS logic for fast operation
- Low power consumption for energy efficiency
- Balanced propagation delays for reliable data transfer
- Suitable for bus-oriented applications
Advantages and Disadvantages
Advantages: - High-speed operation - Low power consumption - 3-state outputs for bus-oriented applications
Disadvantages: - Limited output current capability - Requires external control signals for proper operation
Working Principles
The SN74HC573ADW is an octal transparent latch that stores data when the latch enable (LE) signal is high. The stored data can be outputted through the 3-state outputs when the output enable (OE) signal is also high. This allows multiple devices to share a common bus without interfering with each other's data.
Detailed Application Field Plans
The SN74HC573ADW is commonly used in various applications, including: - Data storage and retrieval systems - Address decoding circuits - Bus interface units - Memory modules - Microcontroller-based systems
Detailed and Complete Alternative Models
Some alternative models that offer similar functionality to the SN74HC573ADW include: - SN74HC373ADW: Octal D-Type Transparent Latches with 3-State Outputs - SN74HC574ADW: Octal D-Type Flip-Flops with 3-State Outputs - SN74HC595ADW: 8-Bit Shift Register with 3-State Outputs
These alternative models provide options for different latch and flip-flop configurations, allowing designers to choose the most suitable device for their specific application requirements.
Word count: 446 words
Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de SN74HC573ADW en soluciones técnicas
Sure! Here are 10 common questions and answers related to the application of SN74HC573ADW:
Q: What is SN74HC573ADW? A: SN74HC573ADW is a type of octal transparent D-type latch with 3-state outputs, commonly used in digital systems.
Q: What is the purpose of SN74HC573ADW? A: It is used to store and control the flow of data in digital circuits, allowing for efficient data transfer between different components.
Q: How many bits can SN74HC573ADW handle? A: SN74HC573ADW can handle 8 bits of data, as it is an octal latch.
Q: What is the voltage range supported by SN74HC573ADW? A: SN74HC573ADW supports a voltage range of 2V to 6V.
Q: Can SN74HC573ADW be used in both parallel and serial data transfer? A: Yes, SN74HC573ADW can be used for both parallel and serial data transfer, depending on the configuration.
Q: What is the maximum clock frequency supported by SN74HC573ADW? A: The maximum clock frequency supported by SN74HC573ADW is typically around 25 MHz.
Q: Can SN74HC573ADW be cascaded to increase the number of bits? A: Yes, multiple SN74HC573ADW latches can be cascaded together to increase the number of bits that can be handled.
Q: Does SN74HC573ADW have any built-in protection features? A: Yes, SN74HC573ADW has built-in diode clamps to protect against electrostatic discharge (ESD) and overvoltage.
Q: Can SN74HC573ADW be used in both synchronous and asynchronous modes? A: Yes, SN74HC573ADW can be used in both synchronous and asynchronous modes of operation.
Q: What are some common applications of SN74HC573ADW? A: SN74HC573ADW is commonly used in microcontrollers, memory systems, data buses, address decoding, and general-purpose digital logic circuits.
Please note that these answers are general and may vary depending on the specific requirements and implementation of the application.