Texas Instruments
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
SN75176BPSR
Ver Detalle Hojas de datos

SN75176BPSR

Product Overview

Category

SN75176BPSR belongs to the category of integrated circuits (ICs).

Use

It is commonly used as a differential bus transceiver for communication purposes.

Characteristics

  • High-speed data transmission
  • Low power consumption
  • Wide operating voltage range
  • ESD protection
  • Robustness against noise and interference

Package

SN75176BPSR is available in a small outline package (SOIC) with 8 pins.

Essence

The essence of SN75176BPSR lies in its ability to facilitate reliable and efficient data communication between devices using differential signaling.

Packaging/Quantity

SN75176BPSR is typically packaged in reels, with each reel containing a specific quantity of ICs. The exact quantity may vary depending on the manufacturer's specifications.

Specifications

  • Supply Voltage: 4.75V to 5.25V
  • Data Rate: Up to 10 Mbps
  • Operating Temperature Range: -40°C to +85°C
  • Input Hysteresis: 50 mV
  • Output Current: ±60 mA

Pin Configuration

The detailed pin configuration of SN75176BPSR is as follows:

  1. RO - Receiver Output
  2. RE - Receiver Enable
  3. DE - Driver Enable
  4. DI - Driver Input
  5. GND - Ground
  6. B - Non-Inverting Bus Line
  7. A - Inverting Bus Line
  8. VCC - Supply Voltage

Functional Features

  • Differential bus transceiver
  • Bi-directional data communication
  • Receiver and driver enable control
  • Noise immunity and ESD protection
  • Suitable for long-distance communication

Advantages

  • High-speed data transmission capability
  • Low power consumption
  • Wide operating voltage range allows compatibility with various systems
  • Robustness against noise and interference ensures reliable communication
  • ESD protection safeguards the IC from electrostatic discharge

Disadvantages

  • Limited data rate compared to some other transceiver ICs
  • Requires external components for complete functionality

Working Principles

SN75176BPSR operates on the principle of differential signaling, where data is transmitted using two complementary signals. The receiver compares the voltage difference between the non-inverting (B) and inverting (A) bus lines to decode the transmitted data. The driver amplifies the input signal and drives the bus lines accordingly.

Detailed Application Field Plans

SN75176BPSR finds applications in various fields, including:

  1. Industrial automation
  2. Automotive electronics
  3. Telecommunications
  4. Networking equipment
  5. Medical devices
  6. Consumer electronics

Alternative Models

Some alternative models that can be considered as alternatives to SN75176BPSR are:

  1. MAX485
  2. LTC2850
  3. ADM2483
  4. SP3485
  5. SN65HVD11

These models offer similar functionality and can be used as substitutes depending on specific requirements.

Word count: 407 words

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de SN75176BPSR en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of SN75176BPSR in technical solutions:

  1. Q: What is SN75176BPSR? A: SN75176BPSR is a popular RS-485/RS-422 transceiver IC used for long-distance communication in industrial applications.

  2. Q: What is the operating voltage range of SN75176BPSR? A: The operating voltage range of SN75176BPSR is typically between 4.75V and 5.25V.

  3. Q: Can SN75176BPSR be used for half-duplex communication? A: Yes, SN75176BPSR supports both half-duplex and full-duplex communication modes.

  4. Q: What is the maximum data rate supported by SN75176BPSR? A: SN75176BPSR can support data rates up to 10 Mbps.

  5. Q: Does SN75176BPSR have built-in protection features? A: Yes, SN75176BPSR has built-in protection against overvoltage, undervoltage, and bus fault conditions.

  6. Q: Can SN75176BPSR be used in noisy environments? A: Yes, SN75176BPSR has excellent noise immunity and can operate reliably in noisy industrial environments.

  7. Q: How many devices can be connected on an RS-485 bus using SN75176BPSR? A: SN75176BPSR supports up to 32 devices on an RS-485 bus.

  8. Q: Is SN75176BPSR compatible with TTL logic levels? A: Yes, SN75176BPSR is compatible with both TTL and CMOS logic levels.

  9. Q: Can SN75176BPSR be used for long-distance communication? A: Yes, SN75176BPSR is specifically designed for long-distance communication up to several kilometers.

  10. Q: Are there any application notes or reference designs available for SN75176BPSR? A: Yes, Texas Instruments provides application notes and reference designs that can help in implementing SN75176BPSR in various technical solutions.

Please note that the answers provided here are general and may vary depending on specific requirements and use cases. It's always recommended to refer to the datasheet and application notes provided by the manufacturer for detailed information.