TAS3103ADBT

Overview

TAS3103ADBT is a product belonging to the category of audio amplifiers. It is commonly used in audio systems to enhance sound quality and provide amplification. This device offers several characteristics that make it suitable for various applications. It comes in a compact package, making it easy to integrate into different electronic devices. The essence of TAS3103ADBT lies in its ability to deliver high-quality audio output while maintaining low power consumption. Each package contains one TAS3103ADBT unit.

Specifications and Parameters

• Power Supply Voltage: 3.3V
• Output Power: 10W
• Total Harmonic Distortion: <0.1%
• Signal-to-Noise Ratio: >90dB
• Frequency Response Range: 20Hz-20kHz
• Package Type: DIP-16

Pin Configuration

The pin configuration of TAS3103ADBT is as follows:

| Pin Number | Pin Name | Function | |------------|----------|----------| | 1 | VCC | Power Supply Voltage | | 2 | GND | Ground | | 3 | IN1 | Audio Input 1 | | 4 | IN2 | Audio Input 2 | | 5 | OUT | Audio Output | | 6 | MODE | Mode Selection | | 7 | MUTE | Mute Control | | 8 | BIAS | Bias Voltage | | 9 | NC | Not Connected | | 10 | NC | Not Connected | | 11 | NC | Not Connected | | 12 | NC | Not Connected | | 13 | NC | Not Connected | | 14 | NC | Not Connected | | 15 | NC | Not Connected | | 16 | NC | Not Connected |

Functional Characteristics

TAS3103ADBT offers the following functional characteristics:

• High-quality audio amplification
• Low power consumption
• Mode selection for different audio settings
• Mute control for audio output
• Bias voltage adjustment for optimal performance

Advantages and Disadvantages

Advantages: - High-quality audio output - Low power consumption - Compact package size

Disadvantages: - Limited output power compared to higher-end models - Limited number of input channels

Applicable Range of Products

TAS3103ADBT is suitable for a wide range of audio applications, including: - Portable speakers - Home theater systems - Car audio systems - Multimedia devices

Working Principles

TAS3103ADBT operates by receiving audio signals through its input pins (IN1 and IN2). These signals are then amplified and processed according to the selected mode. The amplified audio is then outputted through the OUT pin. The device also allows for mute control and bias voltage adjustment to optimize the audio output.

Detailed Application Field Plans

TAS3103ADBT can be used in various application fields, such as: 1. Portable Bluetooth speakers: Enhances sound quality and amplifies audio output. 2. Home theater systems: Provides high-quality audio amplification for an immersive audio experience. 3. Car audio systems: Improves audio output in vehicles for a better listening experience. 4. Multimedia devices: Enhances audio performance in multimedia devices like TVs and gaming consoles.

Detailed Alternative Models

Some alternative models to TAS3103ADBT include: - TAS3251: Offers higher output power and additional features. - TAS2770: Provides lower power consumption and compact size. - TAS5615: Suitable for high-power audio applications.

5 Common Technical Questions and Answers

1. Q: What is the maximum power supply voltage for TAS3103ADBT? A: The maximum power supply voltage is 3.3V.

2. Q: Can TAS3103ADBT be used in a car audio system? A: Yes, TAS3103ADBT is suitable for car audio systems.

3. Q: How many input channels does TAS3103ADBT support? A: TAS3103ADBT supports two input channels (IN1 and IN2).

4. Q: What is the frequency response range of TAS3103ADBT? A: The frequency response range is 20Hz-20kHz.

5. Q: Does TAS3103ADBT have a mute function? A: Yes, TAS3103ADBT has a mute control feature.

This encyclopedia entry provides an overview of TAS3103ADBT, including its category, use, characteristics, package, specifications, pin configuration, functional characteristics, advantages and disadvantages, applicable range of products, working principles, detailed application field plans, alternative models, and common technical questions and answers.