TLV2361IDBVRG4

Product Overview

• Category: Integrated Circuit (IC)
• Use: Operational Amplifier
• Characteristics: Low Voltage, Rail-to-Rail Input/Output, Single Operational Amplifier
• Package: SOT-23 (Small Outline Transistor 23)
• Essence: The TLV2361IDBVRG4 is a single operational amplifier designed for low voltage applications. It offers rail-to-rail input and output capabilities, making it suitable for use in various circuits where the input and output voltages can approach the supply rails.
• Packaging/Quantity: The TLV2361IDBVRG4 is available in tape and reel packaging with 3000 units per reel.

Specifications

• Supply Voltage Range: 2.7V to 5.5V
• Input Offset Voltage: ±1mV (maximum)
• Input Bias Current: ±1pA (typical)
• Gain Bandwidth Product: 1MHz (typical)
• Slew Rate: 0.6V/µs (typical)
• Quiescent Current: 50µA (typical)
• Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The TLV2361IDBVRG4 has a total of 5 pins:

1. IN-: Inverting Input
2. IN+: Non-Inverting Input
3. V-: Negative Power Supply
4. OUT: Output
5. V+: Positive Power Supply

Functional Features

• Low voltage operation allows for compatibility with battery-powered devices.
• Rail-to-rail input/output capability enables maximum utilization of the available voltage range.
• Low input offset voltage ensures accurate signal amplification.
• Low input bias current minimizes the impact on signal sources.
• Wide operating temperature range allows for use in various environmental conditions.

Advantages and Disadvantages

Advantages: - Suitable for low voltage applications - Rail-to-rail input/output capability - Low input offset voltage and bias current - Wide operating temperature range

Disadvantages: - Limited gain bandwidth product compared to some higher-end operational amplifiers - Relatively low slew rate may limit its use in high-frequency applications

Working Principles

The TLV2361IDBVRG4 is a single operational amplifier that amplifies the difference between its inverting and non-inverting inputs. It operates on a low voltage supply, typically ranging from 2.7V to 5.5V. The rail-to-rail input/output capability allows it to handle input and output signals that can approach the supply rails, maximizing the dynamic range of the amplifier.

The amplifier's low input offset voltage ensures accurate amplification of small input signals, while the low input bias current minimizes the impact on signal sources. The wide operating temperature range makes it suitable for use in various environmental conditions.

Detailed Application Field Plans

The TLV2361IDBVRG4 can be used in a wide range of applications, including but not limited to:

1. Battery-powered devices: Due to its low voltage operation, the TLV2361IDBVRG4 is well-suited for use in portable electronics such as smartphones, tablets, and wearable devices.
2. Sensor interfaces: The amplifier's rail-to-rail input/output capability makes it suitable for amplifying signals from various sensors, such as temperature sensors, pressure sensors, and light sensors.
3. Audio amplification: The TLV2361IDBVRG4 can be used in audio circuits where low voltage operation and accurate signal amplification are required.
4. Signal conditioning: It can be used in signal conditioning circuits to amplify and filter weak signals before further processing.

Detailed and Complete Alternative Models

1. TLV2371IDBVRG4: Similar to the TLV2361IDBVRG4, but with dual operational amplifiers instead of a single one.
2. TLV2461IDBVRG4: Another low voltage, rail-to-rail input/output operational amplifier with improved specifications compared to the TLV2361IDBVRG4.
3. MCP6001-I/P: A low-power, rail-to-rail input/output operational amplifier from Microchip Technology.

These alternative models offer similar functionality and can be considered as alternatives to the TLV2361IDBVRG4 based on specific requirements and preferences.

Word count: 536 words