Texas Instruments
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
TLV2454AID
Ver Detalle Hojas de datos

TLV2454AID

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Operational Amplifier
  • Characteristics: Low-power, Rail-to-Rail Input/Output, Quad Operational Amplifier
  • Package: SOIC (Small Outline Integrated Circuit)
  • Essence: The TLV2454AID is a low-power quad operational amplifier designed for general-purpose applications.
  • Packaging/Quantity: Available in tubes or reels, with 2500 units per reel.

Specifications

  • Supply Voltage Range: 2.7V to 16V
  • Input Offset Voltage: ±1.5mV (maximum)
  • Input Bias Current: ±1pA (typical)
  • Gain Bandwidth Product: 3MHz (typical)
  • Slew Rate: 1.6V/µs (typical)
  • Operating Temperature Range: -40°C to +125°C

Pin Configuration

The TLV2454AID has a 14-pin SOIC package with the following pin configuration:

___________ Vcc | 1 14 | Vout1 Vin+| 2 13 | Vout2 Vin-| 3 12 | Vout3 Gnd | 4 11 | Vout4 Vin+| 5 10 | NC Vin-| 6 9 | NC Out1| 7 8 | Out2 ‾‾‾‾‾‾‾‾‾‾‾

Functional Features

  • Low-power consumption makes it suitable for battery-powered applications.
  • Rail-to-rail input and output capability allows for maximum dynamic range.
  • Quad operational amplifier provides flexibility in circuit design.
  • Wide supply voltage range enables compatibility with various systems.

Advantages and Disadvantages

Advantages: - Low-power consumption extends battery life. - Rail-to-rail input/output allows for accurate signal amplification. - Quad configuration offers versatility in circuit design. - Wide supply voltage range enhances compatibility.

Disadvantages: - Limited gain bandwidth product compared to some specialized amplifiers. - Higher input offset voltage than precision operational amplifiers. - Not suitable for applications requiring extremely high-speed amplification.

Working Principles

The TLV2454AID is based on a CMOS (Complementary Metal-Oxide-Semiconductor) technology, which allows for low-power operation. It utilizes a differential input stage followed by a gain stage to amplify the input signal. The rail-to-rail input/output capability ensures that the amplified signal remains within the full range of the power supply voltage.

Detailed Application Field Plans

The TLV2454AID is commonly used in various applications, including:

  1. Portable audio devices: Provides amplification for headphone outputs.
  2. Sensor interfaces: Amplifies weak sensor signals for further processing.
  3. Battery-powered instrumentation: Enables low-power signal conditioning.
  4. Active filters: Used in filter circuits for frequency response shaping.
  5. Signal conditioning circuits: Amplifies and adjusts signals for optimal processing.

Detailed and Complete Alternative Models

  1. LM324: A quad operational amplifier with similar characteristics.
  2. MCP6004: Low-power quad operational amplifier with rail-to-rail I/O.
  3. AD8620: Precision operational amplifier with low input offset voltage.

These alternative models offer similar functionality and can be considered as substitutes for the TLV2454AID in various applications.

Word count: 389 words

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de TLV2454AID en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of TLV2454AID in technical solutions:

  1. Q: What is TLV2454AID? A: TLV2454AID is a quad operational amplifier (op-amp) with rail-to-rail input/output capability, commonly used in various electronic applications.

  2. Q: What is the supply voltage range for TLV2454AID? A: The supply voltage range for TLV2454AID is typically between 2.7V and 6V.

  3. Q: What is the maximum output current TLV2454AID can provide? A: TLV2454AID can provide a maximum output current of around 30mA.

  4. Q: Can TLV2454AID operate in single-supply mode? A: Yes, TLV2454AID can operate in both single-supply and dual-supply modes.

  5. Q: What is the typical input offset voltage of TLV2454AID? A: The typical input offset voltage of TLV2454AID is around 1mV.

  6. Q: Is TLV2454AID suitable for low-power applications? A: Yes, TLV2454AID is designed for low-power applications, with a typical quiescent current of around 500µA per channel.

  7. Q: Can TLV2454AID be used in audio applications? A: Yes, TLV2454AID can be used in audio applications due to its rail-to-rail input/output capability and low distortion characteristics.

  8. Q: What is the bandwidth of TLV2454AID? A: The bandwidth of TLV2454AID is typically around 10MHz.

  9. Q: Can TLV2454AID drive capacitive loads? A: Yes, TLV2454AID can drive capacitive loads up to a certain limit, but it is recommended to use an external compensation capacitor for stability.

  10. Q: Are there any application notes or reference designs available for TLV2454AID? A: Yes, Texas Instruments provides application notes and reference designs for TLV2454AID, which can be found on their website or through their technical support channels.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.