Texas Instruments
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
TPS40000DGQR
Ver Detalle Hojas de datos

TPS40000DGQR

Product Overview

Category

The TPS40000DGQR belongs to the category of integrated circuits (ICs) and specifically falls under the power management ICs.

Use

This product is primarily used for power management applications, providing efficient and reliable voltage regulation.

Characteristics

  • High efficiency: The TPS40000DGQR offers high conversion efficiency, minimizing power losses.
  • Wide input voltage range: It can handle a wide range of input voltages, making it suitable for various applications.
  • Compact package: The product comes in a small form factor, enabling space-saving designs.
  • Low standby power consumption: It consumes minimal power during standby mode, enhancing energy efficiency.

Package and Quantity

The TPS40000DGQR is available in a small outline package (SOP) with 10 pins. It is typically sold in reels containing a specified quantity, such as 2500 units per reel.

Specifications

  • Input Voltage Range: 4.5V to 60V
  • Output Voltage Range: 0.8V to 55V
  • Maximum Output Current: 2A
  • Switching Frequency: 300kHz to 1MHz
  • Operating Temperature Range: -40°C to +125°C

Pin Configuration

The TPS40000DGQR has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. FB: Feedback pin for output voltage regulation
  4. COMP: Compensation pin for stability control
  5. SS/TR: Soft-start/Tracking pin for controlling startup behavior
  6. EN: Enable pin for turning the device on/off
  7. PG: Power Good pin indicating output voltage status
  8. VCC: Supply voltage pin for internal circuitry
  9. SW: Switch pin for connecting the inductor and output capacitor
  10. BST: Boost pin for connecting an external capacitor

Functional Features

  • Voltage Regulation: The TPS40000DGQR provides precise output voltage regulation, ensuring stable power supply to connected devices.
  • Soft-Start Function: It incorporates a soft-start feature that gradually ramps up the output voltage during startup, preventing excessive current flow and voltage overshoot.
  • Overcurrent Protection: The product includes overcurrent protection mechanisms to safeguard against excessive load currents.
  • Thermal Shutdown: In case of high operating temperatures, the TPS40000DGQR automatically shuts down to prevent damage.

Advantages and Disadvantages

Advantages

  • High efficiency leads to reduced power losses.
  • Wide input voltage range allows for versatile applications.
  • Compact package enables space-saving designs.
  • Low standby power consumption enhances energy efficiency.

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications.
  • Higher switching frequencies can introduce additional noise in sensitive circuits.

Working Principles

The TPS40000DGQR operates as a synchronous buck converter, converting a higher input voltage to a lower output voltage efficiently. It utilizes pulse-width modulation (PWM) techniques to control the duty cycle of the switching transistor, regulating the output voltage based on feedback from the FB pin.

Application Field Plans

The TPS40000DGQR finds application in various fields, including: 1. Industrial automation systems 2. Telecommunications equipment 3. Automotive electronics 4. Power supplies for consumer electronics 5. Renewable energy systems

Alternative Models

For those seeking alternative options, the following models provide similar functionality: 1. TPS40001DGQR 2. TPS40002DGQR 3. TPS40003DGQR 4. TPS40004DGQR

These models share comparable specifications and features, allowing users to choose the most suitable option for their specific requirements.

Word count: 520 words

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de TPS40000DGQR en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of TPS40000DGQR in technical solutions:

  1. Q: What is the TPS40000DGQR? A: The TPS40000DGQR is a high-performance synchronous buck controller IC used for voltage regulation in power supply applications.

  2. Q: What is the input voltage range supported by TPS40000DGQR? A: The TPS40000DGQR supports an input voltage range from 4.5V to 60V.

  3. Q: What is the output voltage range that can be achieved using TPS40000DGQR? A: The TPS40000DGQR can achieve an output voltage range from 0.8V to 55V.

  4. Q: What is the maximum output current that TPS40000DGQR can handle? A: The TPS40000DGQR can handle a maximum output current of 20A.

  5. Q: Can TPS40000DGQR operate in a wide temperature range? A: Yes, TPS40000DGQR has a wide operating temperature range of -40°C to 125°C.

  6. Q: Does TPS40000DGQR have built-in protection features? A: Yes, TPS40000DGQR includes various protection features like overvoltage protection, undervoltage lockout, and thermal shutdown.

  7. Q: Is TPS40000DGQR suitable for battery-powered applications? A: Yes, TPS40000DGQR is suitable for battery-powered applications due to its low quiescent current and high efficiency.

  8. Q: Can TPS40000DGQR be used in automotive applications? A: Yes, TPS40000DGQR is automotive-grade and can be used in various automotive applications.

  9. Q: What is the switching frequency range of TPS40000DGQR? A: The switching frequency range of TPS40000DGQR is typically between 100kHz and 1MHz.

  10. Q: Are there any evaluation boards or reference designs available for TPS40000DGQR? A: Yes, Texas Instruments provides evaluation boards and reference designs to help users quickly prototype and implement TPS40000DGQR-based solutions.

Please note that these answers are general and may vary depending on specific application requirements and datasheet specifications.