Texas Instruments
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
UC2876N
Ver Detalle Hojas de datos

UC2876N

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High Efficiency, Low Power Dissipation
  • Package: DIP-16 (Dual In-Line Package with 16 pins)
  • Essence: Voltage Mode PWM Controller
  • Packaging/Quantity: Tube/50 pieces

Specifications

  • Input Voltage Range: 8V to 40V
  • Output Voltage Range: 0.8V to 37V
  • Maximum Output Current: 1.5A
  • Switching Frequency: 100kHz to 500kHz
  • Operating Temperature Range: -40°C to 85°C

Detailed Pin Configuration

  1. VCC: Power Supply Input
  2. GND: Ground
  3. COMP: Compensation Pin for Feedback Loop
  4. FB: Feedback Pin for Output Voltage Regulation
  5. CS: Current Sense Pin for Overcurrent Protection
  6. RT/CT: Timing Components Connection Pins
  7. SYNC: Synchronization Input for Multiple ICs
  8. SS/TR: Soft-Start and Shutdown Control Pin
  9. INV: Inverting Input of Error Amplifier
  10. VREF: Reference Voltage Output
  11. OSC: Oscillator Timing Components Connection Pin
  12. OUT: Power Switch Output
  13. NC: No Connection
  14. NC: No Connection
  15. NC: No Connection
  16. NC: No Connection

Functional Features

  • Voltage Mode PWM Control
  • Adjustable Output Voltage
  • Overcurrent Protection
  • Soft-Start and Shutdown Control
  • Synchronization Capability
  • Error Amplifier for Precise Regulation
  • Reference Voltage Output

Advantages and Disadvantages

Advantages: - High Efficiency - Wide Input Voltage Range - Adjustable Output Voltage - Overcurrent Protection - Synchronization Capability

Disadvantages: - Limited Maximum Output Current (1.5A) - Requires External Timing Components

Working Principles

The UC2876N is a voltage mode PWM controller that regulates the output voltage by adjusting the duty cycle of the power switch. It uses an error amplifier to compare the feedback voltage with a reference voltage and generates an error signal. This error signal is then processed by the control circuitry to adjust the duty cycle and maintain the desired output voltage.

The IC also incorporates overcurrent protection, which monitors the current flowing through the power switch and shuts it down if the current exceeds a certain threshold. Soft-start and shutdown control features ensure smooth startup and shutdown of the power supply.

Detailed Application Field Plans

The UC2876N is commonly used in various power management applications, including:

  1. DC-DC Converters: The IC can be used in buck, boost, or buck-boost configurations to efficiently convert one DC voltage level to another.
  2. Power Supplies: It can be employed in offline or isolated power supplies to regulate the output voltage and improve overall efficiency.
  3. LED Lighting: The UC2876N can drive LED lighting systems, providing precise voltage regulation and dimming control.
  4. Battery Chargers: It is suitable for designing battery charging circuits, ensuring proper charging voltage and current regulation.

Detailed and Complete Alternative Models

  1. UC3842: Similar voltage mode PWM controller with higher maximum output current (2A).
  2. LM2576: Buck converter IC with integrated switch, suitable for low-power applications.
  3. LT1370: High-efficiency step-down switching regulator with adjustable output voltage.

These alternative models offer similar functionality and can be considered as substitutes for the UC2876N depending on specific requirements.

Word count: 470 words

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de UC2876N en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of UC2876N in technical solutions:

  1. Q: What is UC2876N? A: UC2876N is a high-performance current mode PWM controller used in power supply applications.

  2. Q: What are the key features of UC2876N? A: The key features of UC2876N include adjustable frequency, soft-start capability, cycle-by-cycle current limiting, and overvoltage protection.

  3. Q: What is the typical input voltage range for UC2876N? A: The typical input voltage range for UC2876N is between 8V and 16V.

  4. Q: Can UC2876N be used in both buck and boost converter topologies? A: Yes, UC2876N can be used in both buck and boost converter topologies.

  5. Q: What is the maximum switching frequency supported by UC2876N? A: The maximum switching frequency supported by UC2876N is typically 500kHz.

  6. Q: Does UC2876N have built-in protection features? A: Yes, UC2876N has built-in protection features such as overvoltage protection and cycle-by-cycle current limiting.

  7. Q: Can UC2876N operate in continuous or discontinuous conduction mode? A: UC2876N can operate in both continuous and discontinuous conduction mode depending on the application requirements.

  8. Q: What is the recommended operating temperature range for UC2876N? A: The recommended operating temperature range for UC2876N is typically -40°C to +85°C.

  9. Q: Is UC2876N suitable for high-power applications? A: Yes, UC2876N is suitable for high-power applications as it can handle high currents and voltages.

  10. Q: Are there any application notes or reference designs available for UC2876N? A: Yes, Texas Instruments provides application notes and reference designs that can help in implementing UC2876N in various technical solutions.

Please note that the answers provided here are general and may vary depending on specific design considerations and requirements. It is always recommended to refer to the datasheet and application notes provided by the manufacturer for detailed information.