Texas Instruments
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
UC3823BDWTR
Ver Detalle Hojas de datos

UC3823BDWTR

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High-performance PWM Controller
  • Package: SOIC-16
  • Essence: Regulates and controls power delivery in various applications
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 8V to 20V
  • Output Voltage Range: 0V to 15V
  • Operating Temperature Range: -40°C to +85°C
  • Switching Frequency: 100kHz to 1MHz
  • Maximum Duty Cycle: 50%
  • Output Current: Up to 1A

Detailed Pin Configuration

The UC3823BDWTR IC has a total of 16 pins. The pin configuration is as follows:

  1. VREF: Reference Voltage Input
  2. COMP: Error Amplifier Output
  3. FB: Feedback Input
  4. RT/CT: Timing Components Connection
  5. CT: Timing Capacitor Connection
  6. RT: Timing Resistor Connection
  7. OSC: Oscillator Timing Components Connection
  8. GND: Ground
  9. INV: Inverting Input of the Error Amplifier
  10. CS: Current Sense Input
  11. SS/TR: Soft-Start/Tri-State Control
  12. OUT: Output
  13. VCC: Supply Voltage Input
  14. SYNC: Synchronization Input
  15. NC: No Connection
  16. NC: No Connection

Functional Features

  • High-efficiency power conversion
  • Adjustable output voltage
  • Overcurrent protection
  • Soft-start capability
  • Synchronization with external clock signal
  • Error amplifier for precise regulation
  • Current sense input for accurate current monitoring

Advantages and Disadvantages

Advantages: - High-performance PWM control - Wide input voltage range - Adjustable output voltage - Overcurrent protection ensures system safety - Soft-start feature prevents inrush current - Synchronization capability for multi-phase operation

Disadvantages: - Limited maximum duty cycle (50%) - Requires external timing components for operation - Not suitable for high-power applications

Working Principles

The UC3823BDWTR is a pulse-width modulation (PWM) controller that regulates the power delivery in various applications. It operates by comparing the feedback voltage with a reference voltage and adjusting the duty cycle of the output waveform accordingly. This control mechanism allows for precise regulation of the output voltage.

The IC utilizes an error amplifier to compare the feedback voltage with the reference voltage. Any difference between the two voltages is amplified and used to adjust the duty cycle of the PWM signal. By modulating the width of the pulses, the average output voltage can be controlled.

Additionally, the UC3823BDWTR features overcurrent protection, soft-start capability, and synchronization with an external clock signal. These features enhance the performance and safety of the power management system.

Detailed Application Field Plans

The UC3823BDWTR is widely used in various power management applications, including:

  1. Switching Power Supplies: The IC is commonly employed in switch-mode power supplies to regulate the output voltage efficiently.
  2. Battery Chargers: It can be utilized in battery charging circuits to control the charging process and ensure optimal charging conditions.
  3. LED Lighting: The UC3823BDWTR is suitable for driving LED lighting systems, providing accurate and stable power delivery.
  4. Motor Control: It can be integrated into motor control circuits to regulate the speed and torque of electric motors.
  5. Audio Amplifiers: The IC can be used in audio amplifier circuits to provide efficient power conversion and regulation.

Detailed and Complete Alternative Models

  1. UC3823A: Similar to UC3823BDWTR, but with a different pin configuration.
  2. UC3823B: Improved version of UC3823BDWTR with enhanced features and performance.
  3. UC3824: PWM controller with additional features such as adjustable dead-time control.
  4. UC3825: High-performance PWM controller with wider input voltage range and higher output current capability.
  5. UC3826: PWM controller specifically designed for power factor correction applications.

These alternative models offer similar functionality and can be considered as substitutes for the UC3823BDWTR depending on specific requirements and application needs.

Word count: 535 words

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de UC3823BDWTR en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of UC3823BDWTR in technical solutions:

  1. Q: What is UC3823BDWTR? A: UC3823BDWTR is a high-speed PWM controller IC used for controlling power converters in various technical applications.

  2. Q: What are the key features of UC3823BDWTR? A: Some key features include high-frequency operation, adjustable frequency, soft-start capability, and protection features like overcurrent and overvoltage protection.

  3. Q: How does UC3823BDWTR control power converters? A: UC3823BDWTR uses pulse-width modulation (PWM) technique to regulate the output voltage of power converters by adjusting the duty cycle of the switching signal.

  4. Q: What types of power converters can UC3823BDWTR be used with? A: UC3823BDWTR can be used with various power converter topologies such as buck, boost, flyback, and forward converters.

  5. Q: Can UC3823BDWTR handle high-power applications? A: Yes, UC3823BDWTR is designed to handle high-power applications with its robust design and built-in protection features.

  6. Q: Is UC3823BDWTR suitable for both AC and DC input power sources? A: Yes, UC3823BDWTR can be used with both AC and DC input power sources, making it versatile for different applications.

  7. Q: Does UC3823BDWTR have any built-in protection features? A: Yes, UC3823BDWTR has built-in protection features such as overcurrent protection, overvoltage protection, and thermal shutdown.

  8. Q: Can UC3823BDWTR operate at high switching frequencies? A: Yes, UC3823BDWTR is designed to operate at high switching frequencies, making it suitable for applications that require fast response times.

  9. Q: Can UC3823BDWTR be used in automotive applications? A: Yes, UC3823BDWTR is suitable for automotive applications as it can handle the harsh operating conditions and has automotive-grade certifications.

  10. Q: Are there any application notes or reference designs available for UC3823BDWTR? A: Yes, the manufacturer of UC3823BDWTR provides application notes and reference designs that can help users understand its implementation in various technical solutions.

Please note that these answers are general and may vary depending on the specific requirements and use cases. It's always recommended to refer to the datasheet and application notes provided by the manufacturer for detailed information.