Consulte las especificaciones para obtener detalles del producto.
XC6108N24DGR-G
Product Overview
Category
XC6108N24DGR-G belongs to the category of voltage regulators.
Use
It is primarily used for regulating voltage in electronic circuits.
Characteristics
- Small size and lightweight
- Low power consumption
- High precision voltage regulation
- Wide input voltage range
- Overcurrent protection
- Thermal shutdown protection
Package
XC6108N24DGR-G is available in a small surface mount package.
Essence
The essence of XC6108N24DGR-G lies in its ability to provide stable and regulated voltage output for various electronic devices.
Packaging/Quantity
The product is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage Range: 1.2V - 5.0V
- Output Current: Up to 150mA
- Dropout Voltage: 200mV (typical)
- Quiescent Current: 40μA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
XC6108N24DGR-G has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- VOUT: Output voltage pin
- CE: Chip enable pin
Functional Features
- Voltage regulation: XC6108N24DGR-G ensures a stable output voltage regardless of input voltage fluctuations.
- Overcurrent protection: The device automatically shuts down if the output current exceeds the specified limit.
- Thermal shutdown protection: In case of excessive temperature, the regulator enters a thermal shutdown mode to prevent damage.
Advantages and Disadvantages
Advantages
- Compact size and lightweight make it suitable for space-constrained applications.
- Low power consumption helps in energy-efficient designs.
- Wide input voltage range allows compatibility with various power sources.
- Overcurrent and thermal shutdown protection enhance the safety and reliability of the circuit.
Disadvantages
- Limited output current capacity may not be suitable for high-power applications.
- Dropout voltage of 200mV may affect efficiency in low voltage scenarios.
Working Principles
XC6108N24DGR-G operates on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage. The device continuously monitors the input and output voltages, making necessary adjustments to ensure regulation.
Detailed Application Field Plans
XC6108N24DGR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices - Battery-powered systems
Detailed and Complete Alternative Models
Some alternative models that offer similar functionality to XC6108N24DGR-G are: - LM1117-3.3: A popular linear voltage regulator with a fixed output voltage of 3.3V. - AP2112K-3.3: A low dropout voltage regulator with a fixed output voltage of 3.3V. - TPS79633: An ultra-low noise, high PSRR (Power Supply Rejection Ratio) voltage regulator with a fixed output voltage of 3.3V.
These alternative models can be considered based on specific requirements and design constraints.
Word count: 470 words
Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de XC6108N24DGR-G en soluciones técnicas
Sure! Here are 10 common questions and answers related to the application of XC6108N24DGR-G in technical solutions:
Q: What is XC6108N24DGR-G? A: XC6108N24DGR-G is a voltage detector IC (integrated circuit) used for monitoring power supply voltages in electronic devices.
Q: What is the operating voltage range of XC6108N24DGR-G? A: The operating voltage range of XC6108N24DGR-G is typically between 0.9V and 6.0V.
Q: How does XC6108N24DGR-G work? A: XC6108N24DGR-G monitors the input voltage and provides a reset signal when the voltage drops below a certain threshold, ensuring proper operation of the device.
Q: What is the typical reset voltage threshold of XC6108N24DGR-G? A: The typical reset voltage threshold of XC6108N24DGR-G is 2.4V.
Q: Can XC6108N24DGR-G be used in battery-powered applications? A: Yes, XC6108N24DGR-G can be used in battery-powered applications as it operates within a wide voltage range and consumes low quiescent current.
Q: Is XC6108N24DGR-G suitable for automotive applications? A: Yes, XC6108N24DGR-G is suitable for automotive applications as it meets the required standards and has a wide operating temperature range.
Q: Does XC6108N24DGR-G have any built-in protection features? A: Yes, XC6108N24DGR-G has built-in overcurrent protection and thermal shutdown features to ensure safe operation.
Q: Can XC6108N24DGR-G be used in industrial control systems? A: Yes, XC6108N24DGR-G can be used in industrial control systems as it provides reliable voltage monitoring and reset functionality.
Q: What is the package type of XC6108N24DGR-G? A: XC6108N24DGR-G comes in a small SOT-25 package, which is suitable for space-constrained applications.
Q: Where can I find more information about XC6108N24DGR-G? A: You can refer to the datasheet or contact the manufacturer for more detailed information about XC6108N24DGR-G, including application notes and technical support.
Please note that the answers provided here are general and may vary depending on the specific requirements and use cases. It's always recommended to consult the datasheet and relevant documentation for accurate information.