La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
XC6108N29CGR-G

XC6108N29CGR-G

Product Overview

Category

XC6108N29CGR-G belongs to the category of voltage regulators.

Use

It is commonly used in electronic circuits to regulate and stabilize the voltage supplied to various components.

Characteristics

  • Voltage regulation: XC6108N29CGR-G provides a stable output voltage.
  • Low dropout voltage: It operates efficiently even when the input voltage is close to the output voltage.
  • Low quiescent current: It consumes minimal power when in standby mode.
  • Overcurrent protection: It safeguards the circuit by limiting the current flow.
  • Thermal shutdown protection: It prevents overheating by shutting down the regulator in case of excessive temperature.

Package

XC6108N29CGR-G is available in a compact surface-mount package.

Essence

The essence of XC6108N29CGR-G lies in its ability to maintain a constant voltage output, ensuring reliable operation of electronic devices.

Packaging/Quantity

XC6108N29CGR-G is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input voltage range: 2.5V - 6.0V
  • Output voltage: 2.9V
  • Maximum output current: 150mA
  • Dropout voltage: 200mV (typical)
  • Quiescent current: 30μA (typical)
  • Operating temperature range: -40°C to +85°C

Detailed Pin Configuration

XC6108N29CGR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin

Functional Features

  • Voltage regulation: XC6108N29CGR-G maintains a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It limits the current flow to protect the circuit from damage.
  • Thermal shutdown protection: It shuts down the regulator if the temperature exceeds a safe limit, preventing overheating.

Advantages and Disadvantages

Advantages

  • Stable output voltage ensures reliable operation of electronic devices.
  • Low dropout voltage allows efficient operation even with small input-output voltage differentials.
  • Low quiescent current minimizes power consumption in standby mode.
  • Overcurrent protection safeguards the circuit from damage.
  • Thermal shutdown protection prevents overheating.

Disadvantages

  • Limited maximum output current (150mA).
  • Restricted input voltage range (2.5V - 6.0V).

Working Principles

XC6108N29CGR-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage. The overcurrent protection feature monitors the current flow and limits it when necessary. The thermal shutdown protection activates when the temperature exceeds a safe threshold, temporarily disabling the regulator.

Detailed Application Field Plans

XC6108N29CGR-G finds applications in various electronic devices and circuits, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Automotive electronics - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6108N29CGR-G are: - LM1117-2.9 - MCP1700-2902E/TO - LP2985-2.9

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

Word count: 455 words

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de XC6108N29CGR-G en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of XC6108N29CGR-G in technical solutions:

  1. Question: What is XC6108N29CGR-G?
    - Answer: XC6108N29CGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Question: What is the operating voltage range of XC6108N29CGR-G?
    - Answer: The operating voltage range of XC6108N29CGR-G is typically between 0.9V and 6.0V.

  3. Question: How does XC6108N29CGR-G help in technical solutions?
    - Answer: XC6108N29CGR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital devices when the power supply voltage falls below a specified level. This ensures proper system initialization and prevents data corruption.

  4. Question: Can XC6108N29CGR-G be used in battery-powered applications?
    - Answer: Yes, XC6108N29CGR-G can be used in battery-powered applications as it has a low quiescent current consumption, making it suitable for power-sensitive designs.

  5. Question: What is the output type of XC6108N29CGR-G?
    - Answer: XC6108N29CGR-G has an open-drain output type, which means it can be connected to other devices with different voltage levels.

  6. Question: What is the typical reset threshold voltage of XC6108N29CGR-G?
    - Answer: The typical reset threshold voltage of XC6108N29CGR-G is 2.9V.

  7. Question: Can XC6108N29CGR-G be used in automotive applications?
    - Answer: Yes, XC6108N29CGR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.

  8. Question: Does XC6108N29CGR-G have any built-in delay time?
    - Answer: Yes, XC6108N29CGR-G has a built-in delay time of approximately 200ms to ensure stable power supply before releasing the reset signal.

  9. Question: What is the package type of XC6108N29CGR-G?
    - Answer: XC6108N29CGR-G is available in a compact SOT-25 package, which is small and easy to integrate into various designs.

  10. Question: Is XC6108N29CGR-G RoHS compliant?
    - Answer: Yes, XC6108N29CGR-G is RoHS (Restriction of Hazardous Substances) compliant, ensuring it meets environmental regulations.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of XC6108N29CGR-G.