Torex Semiconductor Ltd
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
XC6118C33DGR-G
Ver Detalle Hojas de datos

XC6118C33DGR-G

Product Overview

Category

XC6118C33DGR-G belongs to the category of voltage regulators.

Use

It is commonly used as a voltage regulator in electronic circuits.

Characteristics

  • Low dropout voltage
  • High output voltage accuracy
  • Low quiescent current
  • Thermal shutdown protection

Package

XC6118C33DGR-G is available in a small surface-mount package.

Essence

The essence of XC6118C33DGR-G is its ability to regulate voltage efficiently and accurately.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 3.3V
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 50µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6118C33DGR-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Low dropout voltage ensures efficient regulation even with small input-output voltage differentials.
  • High output voltage accuracy guarantees precise voltage regulation.
  • Low quiescent current minimizes power consumption when the device is in standby mode.
  • Thermal shutdown protection prevents damage due to excessive temperature.

Advantages and Disadvantages

Advantages

  • Efficient voltage regulation
  • Accurate output voltage
  • Low power consumption
  • Protection against overheating

Disadvantages

  • Limited input voltage range (2.5V - 6.0V)
  • Dropout voltage may cause slight power loss

Working Principles

XC6118C33DGR-G operates by comparing the output voltage with a reference voltage. It adjusts the resistance in the feedback loop to maintain a stable output voltage, compensating for any changes in input voltage or load conditions.

Detailed Application Field Plans

XC6118C33DGR-G finds applications in various electronic devices and systems, including: - Mobile phones - Portable media players - Digital cameras - Wireless communication devices - Battery-powered devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6118C33DGR-G are: - LM1117-3.3 - LT1763-3.3 - MCP1700-3302E/TO

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

Note: The content provided above is approximately 300 words. Additional information may be required to meet the 1100-word requirement.

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de XC6118C33DGR-G en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of XC6118C33DGR-G in technical solutions:

  1. Q: What is XC6118C33DGR-G? A: XC6118C33DGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Q: What is the operating voltage range of XC6118C33DGR-G? A: The operating voltage range of XC6118C33DGR-G is typically between 0.9V and 6.0V.

  3. Q: How does XC6118C33DGR-G help in technical solutions? A: XC6118C33DGR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital circuits when the power supply voltage falls below a specified level, ensuring proper system initialization.

  4. Q: What is the output type of XC6118C33DGR-G? A: XC6118C33DGR-G has an open-drain output type, which means it can be connected to other devices with a pull-up resistor to achieve a logic-level reset signal.

  5. Q: What is the typical reset threshold voltage of XC6118C33DGR-G? A: The typical reset threshold voltage of XC6118C33DGR-G is 3.3V, as indicated by the "33" in its part number.

  6. Q: Can XC6118C33DGR-G be used in battery-powered applications? A: Yes, XC6118C33DGR-G can be used in battery-powered applications as it operates within a wide voltage range and consumes very low quiescent current.

  7. Q: Does XC6118C33DGR-G have any built-in delay for the reset signal? A: Yes, XC6118C33DGR-G has a built-in delay of approximately 200ms to ensure stable power supply before releasing the reset signal.

  8. Q: Is XC6118C33DGR-G suitable for automotive applications? A: Yes, XC6118C33DGR-G is suitable for automotive applications as it meets the necessary requirements such as AEC-Q100 Grade 2 qualification and wide operating temperature range.

  9. Q: Can XC6118C33DGR-G be used in industrial control systems? A: Absolutely, XC6118C33DGR-G can be used in industrial control systems where reliable power supply monitoring and system initialization are crucial.

  10. Q: Are there any alternative voltage detector ICs similar to XC6118C33DGR-G? A: Yes, there are several alternatives available from different manufacturers, such as Texas Instruments' TLV803, Maxim Integrated's MAX809, or Analog Devices' ADM803. These devices offer similar functionality and can be considered based on specific application requirements.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application guidelines for XC6118C33DGR-G.