XC6122F646ER-G belongs to the category of integrated circuits (ICs).
This product is commonly used in electronic devices for voltage detection and reset functions.
XC6122F646ER-G is packaged in a SOT-23-5 package, which is a small surface-mount package with five pins.
The essence of XC6122F646ER-G lies in its ability to accurately detect voltage levels and provide a reset signal when necessary, ensuring proper functioning of electronic devices.
This product is typically available in reels containing a quantity of 3000 units per reel.
XC6122F646ER-G has the following pin configuration:
```
| | --|----|-- |____| ```
Pin 1: GND (Ground) Pin 2: VOUT (Output) Pin 3: RST (Reset) Pin 4: VCC (Supply voltage) Pin 5: N/C (No connection)
XC6122F646ER-G operates by continuously monitoring the input voltage. When the voltage falls below the preset threshold, the reset pin is activated, triggering a system reset. The IC's internal circuitry ensures accurate voltage detection and reliable reset functionality.
XC6122F646ER-G finds applications in various electronic devices where voltage monitoring and reset functions are critical. Some potential application fields include:
Some alternative models that offer similar functionality to XC6122F646ER-G are:
These alternative models can be considered based on specific requirements and operating conditions.
Word count: 529 words
Sure! Here are 10 common questions and answers related to the application of XC6122F646ER-G in technical solutions:
Question: What is XC6122F646ER-G?
- Answer: XC6122F646ER-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.
Question: What is the operating voltage range of XC6122F646ER-G?
- Answer: The operating voltage range of XC6122F646ER-G is typically between 0.8V and 6.0V.
Question: How does XC6122F646ER-G work?
- Answer: XC6122F646ER-G works by comparing the input voltage with a fixed reference voltage. When the input voltage falls below or exceeds a certain threshold, it triggers an output signal that can be used to control other components in the system.
Question: What is the output type of XC6122F646ER-G?
- Answer: XC6122F646ER-G has an open-drain output type, which means it can sink current but cannot source current. It requires an external pull-up resistor to provide a logic high level.
Question: What is the typical quiescent current consumption of XC6122F646ER-G?
- Answer: The typical quiescent current consumption of XC6122F646ER-G is very low, usually around 1.0µA.
Question: Can XC6122F646ER-G be used for overvoltage protection?
- Answer: No, XC6122F646ER-G is primarily designed for undervoltage detection. It does not provide overvoltage protection functionality.
Question: What is the typical voltage threshold accuracy of XC6122F646ER-G?
- Answer: The typical voltage threshold accuracy of XC6122F646ER-G is ±1.5%.
Question: Can XC6122F646ER-G be used in automotive applications?
- Answer: Yes, XC6122F646ER-G is AEC-Q100 qualified and suitable for automotive applications.
Question: Does XC6122F646ER-G have a built-in delay circuit?
- Answer: No, XC6122F646ER-G does not have a built-in delay circuit. If a delay is required, an external delay circuit needs to be implemented.
Question: What is the package type of XC6122F646ER-G?
- Answer: XC6122F646ER-G is available in a SOT-23-5 package, which is a small surface-mount package with five pins.
Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.