Consulte las especificaciones para obtener detalles del producto.
XC6124D421ER-G
Product Overview
Category
XC6124D421ER-G belongs to the category of voltage regulators.
Use
It is commonly used for regulating voltage in electronic circuits.
Characteristics
- Small size and lightweight
- High precision voltage regulation
- Low power consumption
- Wide input voltage range
- Overcurrent protection
- Thermal shutdown protection
Package
XC6124D421ER-G comes in a compact SOT-23-5 package.
Essence
The essence of XC6124D421ER-G is to provide stable and regulated voltage output for various electronic devices.
Packaging/Quantity
It is typically packaged in reels, with 3000 units per reel.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage: 4.2V
- Output Current: 100mA
- Dropout Voltage: 200mV (typical)
- Quiescent Current: 30μA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
XC6124D421ER-G has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- EN: Enable pin
- NC: No connection
- VOUT: Output voltage pin
Functional Features
- Voltage regulation: XC6124D421ER-G ensures a stable output voltage regardless of input voltage fluctuations.
- Overcurrent protection: It safeguards the circuit by limiting the current when it exceeds a certain threshold.
- Thermal shutdown protection: In case of excessive heat, the regulator shuts down to prevent damage.
Advantages and Disadvantages
Advantages
- Compact size allows for easy integration into small electronic devices.
- High precision voltage regulation ensures reliable performance.
- Low power consumption helps conserve energy.
- Wide input voltage range makes it compatible with various power sources.
Disadvantages
- Limited output current may not be suitable for high-power applications.
- Dropout voltage may cause a slight voltage drop across the regulator.
Working Principles
XC6124D421ER-G operates based on the principle of feedback control. It compares the output voltage to a reference voltage and adjusts the internal circuitry to maintain a constant output voltage. This is achieved through a combination of active components, such as transistors and resistors, which regulate the flow of current.
Detailed Application Field Plans
XC6124D421ER-G finds applications in various electronic devices, including but not limited to: - Portable consumer electronics - Battery-powered devices - IoT devices - Wearable devices - Medical equipment
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to XC6124D421ER-G are: - XC6124C421ER-G: Similar specifications but with a different package (SOT-89-5) - XC6124D422ER-G: Higher output voltage (4.22V) with similar characteristics and package - XC6124D421FR-G: Same specifications but with a different package (DFN2020-6)
These alternative models provide flexibility in choosing the most suitable voltage regulator for specific requirements.
Word count: 439 words
Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de XC6124D421ER-G en soluciones técnicas
Sure! Here are 10 common questions and answers related to the application of XC6124D421ER-G in technical solutions:
Question: What is XC6124D421ER-G?
- Answer: XC6124D421ER-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is designed to monitor the voltage level of a power supply and provide an output signal when the voltage falls below a certain threshold.Question: What is the operating voltage range of XC6124D421ER-G?
- Answer: The operating voltage range of XC6124D421ER-G is typically between 0.8V and 6.0V.Question: How does XC6124D421ER-G detect voltage levels?
- Answer: XC6124D421ER-G uses a built-in voltage reference and comparator to compare the input voltage with a preset threshold. When the input voltage drops below the threshold, it triggers an output signal.Question: What is the output type of XC6124D421ER-G?
- Answer: XC6124D421ER-G has an open-drain output, which means it can sink current but cannot source current. An external pull-up resistor is required to provide the output voltage level.Question: What is the typical quiescent current consumption of XC6124D421ER-G?
- Answer: The typical quiescent current consumption of XC6124D421ER-G is very low, usually around 1.0µA.Question: Can XC6124D421ER-G be used in battery-powered applications?
- Answer: Yes, XC6124D421ER-G is suitable for battery-powered applications due to its low quiescent current consumption, which helps to conserve battery life.Question: What is the hysteresis feature of XC6124D421ER-G?
- Answer: XC6124D421ER-G has a built-in hysteresis function, which prevents output oscillation near the threshold voltage. This helps to provide stable and reliable voltage monitoring.Question: Can XC6124D421ER-G be used in automotive applications?
- Answer: Yes, XC6124D421ER-G is AEC-Q100 qualified, making it suitable for automotive applications where reliable voltage monitoring is required.Question: What is the temperature range of XC6124D421ER-G?
- Answer: The operating temperature range of XC6124D421ER-G is typically between -40°C and +85°C.Question: How is XC6124D421ER-G packaged?
- Answer: XC6124D421ER-G is available in a small SOT-25 package, which is compact and suitable for space-constrained applications.
Please note that these answers are general and may vary depending on the specific datasheet and application requirements.