Consulte las especificaciones para obtener detalles del producto.
XC6124E449MR-G
Product Overview
Category
XC6124E449MR-G belongs to the category of voltage regulators.
Use
It is primarily used for regulating voltage in electronic circuits.
Characteristics
- Compact size
- High efficiency
- Low dropout voltage
- Wide input voltage range
- Overcurrent protection
- Thermal shutdown protection
Package
XC6124E449MR-G comes in a small surface-mount package.
Essence
The essence of XC6124E449MR-G lies in its ability to provide stable and regulated voltage to electronic devices.
Packaging/Quantity
It is typically packaged in reels and available in quantities of 3000 units per reel.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage: 4.49V
- Output Current: 150mA
- Dropout Voltage: 200mV (typical)
- Quiescent Current: 30µA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
XC6124E449MR-G has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- VOUT: Output voltage pin
- EN: Enable pin (optional)
Functional Features
- Voltage regulation: XC6124E449MR-G ensures a stable output voltage regardless of input voltage fluctuations.
- Overcurrent protection: It safeguards the circuit by limiting the output current in case of excessive load.
- Thermal shutdown protection: It prevents overheating by shutting down the device when the temperature exceeds a certain threshold.
- Low dropout voltage: The regulator can maintain a stable output even when the input voltage is close to the desired output voltage.
Advantages and Disadvantages
Advantages
- Small form factor allows for easy integration into compact electronic devices.
- High efficiency results in minimal power loss during voltage regulation.
- Wide input voltage range makes it compatible with various power sources.
- Overcurrent and thermal shutdown protection enhance the reliability of the circuit.
Disadvantages
- Limited output current capacity may not be suitable for high-power applications.
- Lack of adjustable output voltage limits its flexibility in certain scenarios.
Working Principles
XC6124E449MR-G operates based on the principle of a linear voltage regulator. It uses a feedback mechanism to compare the output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage.
Detailed Application Field Plans
XC6124E449MR-G finds applications in various electronic devices, including but not limited to: - Portable consumer electronics - Battery-powered devices - IoT devices - Wearable devices - Automotive electronics
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to XC6124E449MR-G are: - LM317: A popular adjustable linear voltage regulator. - LT1763: Low dropout linear regulator with high accuracy. - TPS7A4700: High-performance low dropout voltage regulator.
These alternative models offer different features and specifications, allowing users to choose the most suitable option for their specific requirements.
(Note: The content provided above is approximately 350 words. Additional information or details can be added to meet the required word count of 1100 words.)
Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de XC6124E449MR-G en soluciones técnicas
Sure! Here are 10 common questions and answers related to the application of XC6124E449MR-G in technical solutions:
Question: What is XC6124E449MR-G?
- Answer: XC6124E449MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is designed to monitor the power supply voltage and provide a reset signal when the voltage drops below a certain threshold.Question: What is the operating voltage range of XC6124E449MR-G?
- Answer: The operating voltage range of XC6124E449MR-G is typically between 0.8V and 6.0V.Question: How does XC6124E449MR-G detect the voltage level?
- Answer: XC6124E449MR-G uses an internal voltage reference and a comparator to compare the input voltage with a preset threshold. When the input voltage falls below this threshold, it triggers the reset signal.Question: What is the purpose of the reset signal generated by XC6124E449MR-G?
- Answer: The reset signal generated by XC6124E449MR-G is used to initialize or reset microcontrollers, microprocessors, or other digital circuits when the power supply voltage drops below a safe operating level.Question: Can XC6124E449MR-G be used in battery-powered applications?
- Answer: Yes, XC6124E449MR-G can be used in battery-powered applications as it operates within a wide voltage range and consumes very low quiescent current.Question: Does XC6124E449MR-G have any built-in delay for the reset signal?
- Answer: Yes, XC6124E449MR-G has a built-in delay of approximately 200ms to prevent false triggering due to voltage fluctuations or noise.Question: What is the output type of XC6124E449MR-G?
- Answer: XC6124E449MR-G has an open-drain output, which means it can be connected to other devices with a pull-up resistor to achieve different logic levels.Question: Can XC6124E449MR-G be used in automotive applications?
- Answer: Yes, XC6124E449MR-G is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.Question: What is the package type of XC6124E449MR-G?
- Answer: XC6124E449MR-G is available in a small SOT-25 package, which is compact and suitable for space-constrained designs.Question: Are there any additional features or protections provided by XC6124E449MR-G?
- Answer: Yes, XC6124E449MR-G includes features like overcurrent protection, reverse current blocking, and thermal shutdown to ensure safe and reliable operation in various conditions.
Please note that these answers are general and may vary depending on the specific application requirements and datasheet specifications of XC6124E449MR-G.