La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
XC6124E545MR-G

XC6124E545MR-G

Product Overview

Category

XC6124E545MR-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Compact size
  • High efficiency
  • Low dropout voltage
  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection

Package

XC6124E545MR-G is available in a small surface-mount package.

Essence

The essence of XC6124E545MR-G lies in its ability to provide stable and regulated voltage output for various electronic devices.

Packaging/Quantity

The product is typically packaged in reels and comes in quantities of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 5.0V
  • Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 45µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin

Functional Features

  • Voltage regulation: Provides a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: Safeguards the circuit by limiting the current when it exceeds a certain threshold.
  • Thermal shutdown protection: Prevents overheating by shutting down the regulator when the temperature exceeds a safe limit.

Advantages and Disadvantages

Advantages

  • Small form factor allows for easy integration into compact designs.
  • High efficiency results in minimal power loss.
  • Wide input voltage range accommodates various power sources.
  • Overcurrent and thermal protection enhance circuit reliability.

Disadvantages

  • Limited output current may not be suitable for high-power applications.
  • Dropout voltage may cause a slight voltage drop across the regulator.

Working Principles

XC6124E545MR-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage. This is achieved through a combination of active components, such as transistors and resistors, which regulate the flow of current.

Detailed Application Field Plans

XC6124E545MR-G finds application in various electronic devices, including but not limited to: - Portable consumer electronics - Battery-powered devices - IoT devices - Wearable devices - Embedded systems

Detailed and Complete Alternative Models

  1. XC6206P332MR-G: Similar voltage regulator with a lower dropout voltage and higher output current capability.
  2. XC6220B332MR-G: Voltage regulator with adjustable output voltage and higher output current capacity.
  3. XC6219B332MR-G: Low quiescent current voltage regulator suitable for battery-powered applications.

These alternative models offer different features and specifications, allowing designers to choose the most suitable option for their specific requirements.

Word count: 404 words

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de XC6124E545MR-G en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of XC6124E545MR-G in technical solutions:

  1. Question: What is XC6124E545MR-G?
    Answer: XC6124E545MR-G is a voltage detector IC manufactured by Torex Semiconductor. It is commonly used in various technical solutions for voltage monitoring and detection purposes.

  2. Question: What is the operating voltage range of XC6124E545MR-G?
    Answer: The operating voltage range of XC6124E545MR-G is from 0.8V to 6.0V.

  3. Question: What is the output type of XC6124E545MR-G?
    Answer: XC6124E545MR-G has an open-drain output type.

  4. Question: What is the typical quiescent current consumption of XC6124E545MR-G?
    Answer: The typical quiescent current consumption of XC6124E545MR-G is 1.0µA.

  5. Question: Can XC6124E545MR-G be used for overvoltage detection?
    Answer: No, XC6124E545MR-G is specifically designed for undervoltage detection only.

  6. Question: What is the hysteresis voltage of XC6124E545MR-G?
    Answer: The hysteresis voltage of XC6124E545MR-G is typically 50mV.

  7. Question: Is XC6124E545MR-G suitable for battery-powered applications?
    Answer: Yes, XC6124E545MR-G is suitable for battery-powered applications due to its low quiescent current consumption.

  8. Question: Can XC6124E545MR-G tolerate reverse polarity?
    Answer: No, XC6124E545MR-G cannot tolerate reverse polarity. Proper circuit protection should be implemented to prevent reverse voltage application.

  9. Question: What is the temperature range of XC6124E545MR-G?
    Answer: The temperature range of XC6124E545MR-G is from -40°C to +85°C.

  10. Question: Can XC6124E545MR-G be used in automotive applications?
    Answer: Yes, XC6124E545MR-G is AEC-Q100 qualified and can be used in automotive applications that require undervoltage detection.

Please note that these answers are based on general information about XC6124E545MR-G. It is always recommended to refer to the datasheet and consult with the manufacturer for specific technical details and application requirements.