Consulte las especificaciones para obtener detalles del producto.
XC6124E639MR-G
Product Overview
Category
XC6124E639MR-G belongs to the category of voltage regulators.
Use
It is used to regulate and stabilize the voltage in electronic circuits.
Characteristics
- High precision voltage regulation
- Low dropout voltage
- Low quiescent current
- Thermal shutdown protection
- Short circuit protection
Package
XC6124E639MR-G is available in a small form factor SOT-23-5 package.
Essence
The essence of XC6124E639MR-G is to provide a stable and regulated voltage supply to electronic devices.
Packaging/Quantity
XC6124E639MR-G is typically packaged in reels containing 3000 units.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage Range: 1.2V - 5.5V
- Dropout Voltage: 200mV (typical)
- Quiescent Current: 30μA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
XC6124E639MR-G has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- EN: Enable pin
- NC: No connection pin
- VOUT: Output voltage pin
Functional Features
- High Precision Regulation: The XC6124E639MR-G provides accurate voltage regulation, ensuring stable power supply to connected devices.
- Low Dropout Voltage: With a low dropout voltage, this regulator can maintain a stable output even when the input voltage is close to the desired output voltage.
- Low Quiescent Current: The low quiescent current ensures minimal power consumption when the regulator is in standby or idle mode.
- Thermal Shutdown Protection: The device incorporates thermal shutdown protection, preventing damage due to excessive heat.
- Short Circuit Protection: XC6124E639MR-G is equipped with short circuit protection, safeguarding the regulator and connected devices from potential damage.
Advantages and Disadvantages
Advantages
- High precision voltage regulation ensures stable power supply.
- Low dropout voltage allows for efficient operation even with low input voltages.
- Low quiescent current minimizes power consumption.
- Thermal shutdown protection prevents overheating.
- Short circuit protection safeguards against potential damage.
Disadvantages
- Limited input voltage range (2.5V - 6.0V).
- Output voltage range may not be suitable for all applications.
Working Principles
XC6124E639MR-G operates based on a feedback control mechanism. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage. When the input voltage drops below the desired output voltage, the regulator compensates by increasing its internal resistance to provide a constant output voltage.
Detailed Application Field Plans
XC6124E639MR-G finds applications in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Automotive electronics - Industrial control systems
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to XC6124E639MR-G are: - LM1117-3.3: A popular linear voltage regulator with similar specifications. - LT1763: A low dropout voltage regulator suitable for demanding applications. - TPS7A47: A high-performance voltage regulator with adjustable output voltage.
These alternative models offer similar functionality and can be chosen based on specific application requirements.
Word count: 400 words
Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de XC6124E639MR-G en soluciones técnicas
Sure! Here are 10 common questions and answers related to the application of XC6124E639MR-G in technical solutions:
Question: What is XC6124E639MR-G?
- Answer: XC6124E639MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is used to monitor the voltage level in electronic circuits.Question: What is the operating voltage range of XC6124E639MR-G?
- Answer: The operating voltage range of XC6124E639MR-G is from 0.6V to 6.0V.Question: How does XC6124E639MR-G work?
- Answer: XC6124E639MR-G continuously monitors the input voltage and compares it with a fixed reference voltage. When the input voltage falls below or rises above the reference voltage, it triggers an output signal.Question: What is the output type of XC6124E639MR-G?
- Answer: XC6124E639MR-G has an open-drain output type, which means it can sink current but cannot source current.Question: What is the quiescent current consumption of XC6124E639MR-G?
- Answer: The quiescent current consumption of XC6124E639MR-G is typically 1.0µA.Question: Can XC6124E639MR-G be used for overvoltage protection?
- Answer: No, XC6124E639MR-G is primarily designed for undervoltage detection. It does not provide overvoltage protection.Question: What is the typical response time of XC6124E639MR-G?
- Answer: The typical response time of XC6124E639MR-G is 200µs.Question: Can XC6124E639MR-G be used in battery-powered applications?
- Answer: Yes, XC6124E639MR-G is suitable for battery-powered applications due to its low quiescent current consumption.Question: Does XC6124E639MR-G have any built-in hysteresis?
- Answer: Yes, XC6124E639MR-G has a built-in hysteresis of typically 50mV, which helps to prevent output oscillation near the threshold voltage.Question: What is the package type of XC6124E639MR-G?
- Answer: XC6124E639MR-G is available in a SOT-25 package, which is a small surface-mount package with 5 pins.
Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.