Torex Semiconductor Ltd
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
XC6124E649MR-G
Ver Detalle Hojas de datos

XC6124E649MR-G

Product Overview

Category

XC6124E649MR-G belongs to the category of voltage regulators.

Use

It is commonly used for regulating voltage in electronic circuits.

Characteristics

  • Voltage regulation capability
  • Compact size
  • Low power consumption
  • Wide input voltage range
  • High efficiency

Package

XC6124E649MR-G is available in a small surface-mount package.

Essence

The essence of XC6124E649MR-G lies in its ability to provide stable and regulated voltage output.

Packaging/Quantity

XC6124E649MR-G is typically packaged in reels or tape and reel packaging, with a quantity of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 3.3V
  • Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 40µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6124E649MR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. CE: Chip enable pin

Functional Features

  • Low dropout voltage
  • Overcurrent protection
  • Thermal shutdown protection
  • Short-circuit protection
  • Reverse polarity protection

Advantages and Disadvantages

Advantages

  • Small form factor
  • Wide input voltage range
  • Low power consumption
  • Stable and regulated output voltage
  • Built-in protection features

Disadvantages

  • Limited output current capacity
  • Higher cost compared to some alternatives

Working Principles

XC6124E649MR-G operates by regulating the input voltage to provide a stable output voltage. It utilizes internal circuitry to monitor and adjust the voltage levels, ensuring a consistent output even with varying input conditions.

Detailed Application Field Plans

XC6124E649MR-G finds applications in various electronic devices and systems, including but not limited to: - Portable consumer electronics - Battery-powered devices - IoT devices - Industrial control systems - Automotive electronics

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6124E649MR-G are: - LM1117-3.3 - MCP1700-3302E/TO - TS2937CP-3.3

These models offer similar voltage regulation capabilities and can be suitable replacements depending on specific requirements.

Word count: 320 words

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de XC6124E649MR-G en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of XC6124E649MR-G in technical solutions:

  1. Question: What is XC6124E649MR-G?
    - Answer: XC6124E649MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is used to monitor the voltage level in electronic circuits.

  2. Question: What is the operating voltage range of XC6124E649MR-G?
    - Answer: The operating voltage range of XC6124E649MR-G is from 0.6V to 6.0V.

  3. Question: How does XC6124E649MR-G work?
    - Answer: XC6124E649MR-G continuously monitors the input voltage and compares it with a fixed reference voltage. When the input voltage drops below or rises above the reference voltage, it triggers an output signal.

  4. Question: What is the purpose of using XC6124E649MR-G in technical solutions?
    - Answer: XC6124E649MR-G is commonly used as a power supply monitoring device to ensure stable operation of electronic systems. It can be used to detect undervoltage or overvoltage conditions and trigger appropriate actions.

  5. Question: Can XC6124E649MR-G be used in battery-powered applications?
    - Answer: Yes, XC6124E649MR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.

  6. Question: What is the output configuration of XC6124E649MR-G?
    - Answer: XC6124E649MR-G has an open-drain output configuration, which means it requires an external pull-up resistor to provide a logic-level output signal.

  7. Question: What is the typical accuracy of XC6124E649MR-G?
    - Answer: The typical accuracy of XC6124E649MR-G is ±1.5%.

  8. Question: Can XC6124E649MR-G be used in automotive applications?
    - Answer: Yes, XC6124E649MR-G is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.

  9. Question: Does XC6124E649MR-G have built-in hysteresis?
    - Answer: Yes, XC6124E649MR-G has a built-in hysteresis function to prevent output oscillation near the threshold voltage.

  10. Question: What is the package type of XC6124E649MR-G?
    - Answer: XC6124E649MR-G is available in a small SOT-25 package, which is compact and suitable for space-constrained applications.

Please note that the answers provided here are general and may vary depending on specific application requirements.