Vishay Dale
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
NTHS1205N01N1003JE
Ver Detalle Hojas de datos

NTHS1205N01N1003JE

Product Overview

  • Category: Electronic Component
  • Use: Voltage Regulator
  • Characteristics: High precision, low dropout voltage, small package size
  • Package: SOT-23-5
  • Essence: Regulates input voltage to a precise output voltage
  • Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Input Voltage Range: 4.5V to 24V
  • Output Voltage: 1.2V
  • Output Current: 150mA
  • Dropout Voltage: 170mV at 100mA
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

  • Pin 1: Input
  • Pin 2: Ground
  • Pin 3: Enable
  • Pin 4: NC
  • Pin 5: Output

Functional Features

  • Precise voltage regulation
  • Low dropout voltage
  • Thermal shutdown protection
  • Short-circuit protection

Advantages

  • Small package size
  • Wide input voltage range
  • High precision output voltage

Disadvantages

  • Limited output current capacity
  • Higher dropout voltage compared to some alternatives

Working Principles

The NTHS1205N01N1003JE uses a feedback control loop to maintain a stable output voltage regardless of changes in the input voltage or load conditions. It achieves this by comparing the output voltage to a reference voltage and adjusting the internal circuitry accordingly.

Detailed Application Field Plans

  • Battery-powered devices
  • Portable electronics
  • IoT devices
  • Wearable technology

Detailed and Complete Alternative Models

  • LM1117
  • MCP1703
  • XC6206

This voltage regulator is commonly used in applications where a stable and precise voltage supply is required, such as battery-powered devices, portable electronics, IoT devices, and wearable technology. While it offers advantages such as high precision and a small package size, it has limitations in terms of output current capacity and dropout voltage compared to some alternative models like LM1117, MCP1703, and XC6206.

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de NTHS1205N01N1003JE en soluciones técnicas

  1. What is NTHS1205N01N1003JE?

    • NTHS1205N01N1003JE is a surface mount, high temperature, non-inductive thick film resistor.

  2. What are the key specifications of NTHS1205N01N1003JE?

    • The key specifications include a resistance value of 100k ohms, a power rating of 0.125W, and a tolerance of 5%.

  3. In what technical solutions can NTHS1205N01N1003JE be used?

    • NTHS1205N01N1003JE can be used in various technical solutions such as power supplies, voltage dividers, and signal conditioning circuits.

  4. What is the operating temperature range of NTHS1205N01N1003JE?

    • The operating temperature range of NTHS1205N01N1003JE is -55°C to +155°C.

  5. Is NTHS1205N01N1003JE suitable for high-temperature applications?

    • Yes, NTHS1205N01N1003JE is designed for high-temperature applications and can withstand elevated temperatures.

  6. Can NTHS1205N01N1003JE be used in automotive electronics?

    • Yes, NTHS1205N01N1003JE is suitable for use in automotive electronics due to its high-temperature capabilities.

  7. What is the recommended soldering profile for NTHS1205N01N1003JE?

    • The recommended soldering profile includes a peak temperature of 260°C for 10 seconds.

  8. Does NTHS1205N01N1003JE have any special handling requirements?

    • NTHS1205N01N1003JE should be handled with standard ESD precautions to prevent damage during assembly.

  9. Can NTHS1205N01N1003JE be used in high-frequency applications?

    • NTHS1205N01N1003JE is not specifically designed for high-frequency applications and may not be suitable for such use.

  10. Where can I find detailed application notes for using NTHS1205N01N1003JE in technical solutions?

    • Detailed application notes for NTHS1205N01N1003JE can be found on the manufacturer's website or in the product datasheet.