Vishay Semiconductor Diodes Division
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
EGP10DHM3/73
Ver Detalle Hojas de datos

EGP10DHM3/73

Product Overview

The EGP10DHM3/73 belongs to the category of semiconductor devices and is specifically a Schottky diode. It is commonly used in electronic circuits for its unique characteristics, which include low forward voltage drop and fast switching speed. The package type for this diode is typically surface mount, and it is available in various quantities per package.

Specifications

  • Forward Voltage Drop: 0.35V
  • Reverse Voltage: 30V
  • Maximum Continuous Current: 1A
  • Package Type: SOD-123

Detailed Pin Configuration

The EGP10DHM3/73 has a standard SOD-123 package with two pins. The anode is connected to pin 1, while the cathode is connected to pin 2.

Functional Features

  • Low forward voltage drop
  • Fast switching speed
  • High reliability
  • Surface mount package for easy PCB assembly

Advantages and Disadvantages

Advantages

  • Efficient power conversion
  • Compact size
  • Suitable for high-frequency applications

Disadvantages

  • Limited reverse voltage tolerance
  • Sensitive to overvoltage conditions

Working Principles

The EGP10DHM3/73 operates based on the Schottky barrier principle, where the metal-semiconductor junction allows for faster switching compared to standard PN-junction diodes. This results in lower forward voltage drop and reduced switching losses.

Detailed Application Field Plans

The EGP10DHM3/73 is widely used in: - Power supply units - Voltage clamping circuits - Switching regulators - Overvoltage protection circuits

Detailed and Complete Alternative Models

Some alternative models to the EGP10DHM3/73 include: - 1N5817 - SS34 - BAT54S

In conclusion, the EGP10DHM3/73 Schottky diode offers efficient power conversion and fast switching speed, making it suitable for various electronic applications. However, its limited reverse voltage tolerance and sensitivity to overvoltage conditions should be considered when designing circuits.

[Word count: 271]

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de EGP10DHM3/73 en soluciones técnicas

  1. What is the EGP10DHM3/73 used for in technical solutions?

    • The EGP10DHM3/73 is a high-performance digital humidity sensor module commonly used for measuring and monitoring humidity levels in various technical applications.

  2. What is the operating voltage range of the EGP10DHM3/73?

    • The EGP10DHM3/73 operates within a voltage range of 2.7V to 5.5V, making it suitable for a wide range of electronic systems.

  3. How accurate is the humidity measurement provided by the EGP10DHM3/73?

    • The EGP10DHM3/73 offers high accuracy with a typical tolerance of ±2% relative humidity.

  4. Can the EGP10DHM3/73 be interfaced with microcontrollers or single-board computers?

    • Yes, the EGP10DHM3/73 can be easily interfaced with microcontrollers or single-board computers through its I2C interface, allowing for seamless integration into various technical solutions.

  5. Does the EGP10DHM3/73 have built-in temperature compensation?

    • Yes, the EGP10DHM3/73 incorporates built-in temperature compensation to ensure accurate humidity measurements across a wide temperature range.

  6. What is the response time of the EGP10DHM3/73 in providing humidity readings?

    • The EGP10DHM3/73 has a fast response time, typically providing humidity readings within a few seconds.

  7. Is the EGP10DHM3/73 suitable for outdoor applications?

    • The EGP10DHM3/73 is designed to withstand varying environmental conditions, making it suitable for both indoor and outdoor technical applications.

  8. Can the EGP10DHM3/73 be calibrated for specific humidity ranges?

    • Yes, the EGP10DHM3/73 can be calibrated for specific humidity ranges, allowing for customization based on the requirements of the technical solution.

  9. What is the power consumption of the EGP10DHM3/73 during operation?

    • The EGP10DHM3/73 features low power consumption, making it energy-efficient and suitable for battery-powered applications.

  10. Are there any special considerations for integrating the EGP10DHM3/73 into a technical solution?

    • When integrating the EGP10DHM3/73, it's important to ensure proper signal conditioning and protection against environmental contaminants to maintain accurate and reliable performance.